Grinding, Breaking, Crushing Grinding, Breaking, Crushing

How it works :

Two rotors rotating in opposite directions at slow and differential speed are equipped with disks and blades for shredding the product. They are cleaned continuously by one-piece combs.

How it works :

Two rotors rotating in opposite directions, equipped with smooth rolls used to crush the product. These are cleaned continuously by scrapers.
One of the 2 rolls is mounted on a pivot, making it possible to adjust the gap between rolls or to move back during operation if a hard body is being processed.
Product must be fed at a constant rate.

How it works

A rotor rotating at high speed (from 800 to 1500 rev/min depending on the model), equipped with special steel hammers that strike the product and project it against the grinding chamber screens.
The output grain size is guaranteed by a calibration grid in the bottom section.
Product must be fed along the entire length of the rotor at a regular rate.

How it works

A rotor fitted with blades rotating at slow speed impacts and crushes the material by forcing it through fixed counter-knives.

How it works

Two rotors fitted with shears rotate in opposite directions and at different speeds to cut the pieces of product. Combs ensure that the rotors are kept clean at all times. The machine does not have a calibration grid, so it is the geometry of the shredding tools that determines the size of the product. The product must be fed at a constant rate and distributed over the entire useful length of the grinding cylinders.